| Application |
Milling, drilling, turning |
| Axes |
2 or 3 from A to Z and Z0 |
| Encoder inputs |
TTL |
| Display step |
Adjustable, max. 7 digits
Linear axis: 1 mm to 0.0001 mm
Angular axis: 1° to 0.001° (00° 00′ 01”) |
| Display |
5.7” monochrome flat-panel display for position values, dialogs and inputs, and soft keys |
| Status display |
Tool, reference point, operating function, feed rate, ABS/INC, mm/inch, stopwatch |
| Functions |
- 10 reference points
- 16 tools
- REF reference-mark evaluation for distance-coded or single reference marks
- Distance-to-go mode
- Axis coupling
- Scaling factor
- mm/inch switching
- Absolute-incremental display
- On-screen help and operating instructions
- Graphic positioning support (Near Zero warning)
- Calculator
|
| For turning |
- Taper calculator
- Radius/diameter switching
- Freezing the tool position for back-off
- Vectoring: X/Y display of the traverse path with inclined top slide
|
| For milling/drilling/boring |
- Calculation of positions for hole patterns (circular patterns and linear patterns)
- Tool radius and tool length compensation
- Probing functions for reference-point acquisition with KT edge finder: “Edge”, “Centerline” and
“Circle center”
|
| Error compensation |
- Axis error: Linear and segmented over up to 200 points
- Backlash compensation: for compensation of reversal error
|
| Data interface |
RS-232-C/V.24 300 to 115 200 baud |
| Switching I/O |
- Input for edge finder (with switching signal or contact triggering)
- Further input/outputs over the IOB 49 external input/output unit
|
| Accessories |
Mounting arms, mounting frame, KT 130 edge finder (for milling) |
| Power connection |
100 V AC to 240 V AC (–15 % to +10 %), 47 Hz to 63 Hz; 30 W |
| Operating temperature |
0° C to 45° C |
| Protection(IEC 60 529) |
IP 40 (IP 54 front panel) |
| Weight |
2.6 kg |
